Search results for "Heat sink"

Direct sunlight facility for testing and research in HCPV

2014

A facility for testing different components for HCPV application has been developed in the framework of "Fotovoltaico ad Alta Efficienza" (FAE) project funded by the Sicilian Regional Authority (PO FESR Sicilia 2007/2013 4.1.1.1). The testing facility is equipped with an heliostat providing a wide solar beam inside the lab, an optical bench for mounting and aligning the HCPV components, electronic equipments to characterize the I-V curves of multijunction cells operated up to 2000 suns, a system to circulate a fluid in the heat sink at controlled temperature and flow-rate, a data logging system with sensors to measure temperatures in several locations and fluid pressures at the inlet and ou…

Analysis of Protected Accidental Transients in the EFIT Reactor With the RELAP5 Thermal-Hydraulic Code

2008

The European Facility for Industrial Transmutation (EFIT) is aimed at demonstrating the feasibility of transmutation process through the Accelerator Driven System (ADS) route on an industrial scale. The conceptual design of this reactor of about 400 MW thermal power is under development in the frame of the European EUROTRANS Integrated Project of the EURATOM Sixth Framework Program (FP6). EFIT is a pool-type reactor cooled by forced circulation of lead in the primary system where the heat is removed by steam generators installed inside the reactor vessel. The reactor power is sustained by a spallation neutron source supplied by a proton beam impinging on a lead target at the core centre. A …

Full Wave Solution for Intel CPU With a Heat Sink for EMC Investigations

2010

A CPU with a heat sink (e.g. Intel Pentium 4 and Intel Pentium dual core) is a challenging problem for EMC analysis. A Very Large Scale Integrated (VLSI) device was modelled using the Finite Element Method (FEM) frequency domain solver to obtain a 3D full wave solution. The electromagnetic (EM) radiation emitted from these high power microelectronic circuits connected to a heat sink was found to have resonant frequencies around 2.4 GHz and 5 GHz with reflection coefficients less than -19 dB and -8 dB respectively. These resonant frequencies are very close to the operating frequency of both IEEE and Bluetooth wireless communication systems. This paper proposes a new benchmark model based on …

Experimental characterization of a novel configuration of thermoelectric refrigerator with integrated finned heat pipes

2021

Abstract Thermoelectric refrigerating systems (TER) are environment-friendly technologies. They have several advantages such as low maintenance costs, are less cumbersome and long lifetime. However, these systems have low coefficient of performance and are limited in achieving low temperature levels. This study investigates a new configuration of TE refrigerator employing a novel arrangement of heat sinks with integrated flat and finned heat pipes. A mathematical model is firstly developed to predict transient temperatures and cooling limit time. An experimental characterization is then performed and it includes optimization of energy consumption, cooling time, temperature levels and TE ref…

An Investigation of the Thermal Effects in Orthogonal Cutting Associated with Multilayer Coatings

2001

Abstract This paper deals with an experimental and analytical investigation into the tool-chip interface behaviour, influencing the temperature and heat transfer at the multilayered coated-tool rake face during orthogonal cutting of carbon and stainless steels. New methodology for assessing the amount of thermal energy generated when machining with a coated tool insert with natural and restricted contact coupled with a metallic chip, using thermophysical properties of the sliding materials is developed in this study. It was proven, based on the heat flux analysis, that the use of advanced coatings with an intermediate Al 2 O 3 layer can substantially improve the heat flow into the chip at d…

Etude numérique de la convection forcée turbulente dans un dissipateur thermique composé de plusieurs rangées d'ailettes de différentes formes

2016

In this thesis, we present an numerical study of turbulent forced convection in a heat sink provided with a transverse baffle in the bypass. The first model is composed of plates fins and the second consists of adding pin fins between the plates fins. The governing equations, based on the k- SSt turbulence model, are disscredized and solved by the finite volume method and the SIMPLE algorithm. Dynamic results are presented in terms of velocity fields, profiles of the axial velocities in selected sections and pressure drop. The thermal study is presented in terms of temperature fields and the distribution of Nusselt number. A ratio between the thermal and dynamic performances is presented to…

Heat in Metal Cutting

2008

This chapter provides comprehensive knowledge regarding thermal effects during the cutting process with both uncoated and coated cutting tools. Main heat sources and flowing heat fluxes into the tool, chip and workpiece are characterized and quantified. The heat distribution models that allow the analytical prediction of heat partition between the tool and the chip are specified. They consider such thermal properties as specific heat, thermal conductivity and diffusivity, Peclet thermal number, and heat transmission ratio, all as functions of temperature. Finite element method and finite difference method simulations applied to the prediction of temperature fields are outlined for turning a…

Heating and cooling with a heat pump

2009

Heat Pipe-Cooled Microstructured Reactor Concept for Highly Exothermal Ionic Liquid Syntheses

2010

Heat pipes used for cooling of microstructured reactors are a new approach for sustainable processing also in the lab-scale within a temperature range from ambient to more than 180 °C. The main advantage of heat pipe cooling is the dynamic behavior, i.e., the cooling rate depends on the heat released. Heat pipes can also suppress thermal runaways due to their extremely short response times on momentary temperature rises. As an example, the highly exothermal synthesis of 1-ethyl-3-methylimidazolium trifluoromethanesulfonate from the respective reactants 1-ethyl-imidazole and methyltrifluoromethanesulfonate was investigated. By transferring the protocol to continuous-flow conditions in the mi…

Combined heat and power generation with a HCPV system at 2000 suns

2015

In the framework of the FAE “Fotovoltaico ad Alta Efficienza” (“High Efficiency Photovoltaic”) Research Project funded by the Sicilian Region under the program PO FESR Sicilia 2007/2013 4.1.1.1, we have developed an innovative solar CHP system for the combined production of heat and power at the high concentration level of 2000 suns [1]. This work shows the experimental results obtained on FAE-HCPV modules and analyses the behaviour of the system. The solar radiation is concentrated on commercial InGaP/InGaAs/Ge triple-junction solar cells designed for intensive work. The primary optics is a rectangular off-axis parabolic mirror (with a size of 46x46 = 2116 cm2 in a projection normal to the…